Autodesk, Inc. NASDAQ: ADSK programy do projektowania CAD/CAM

czyli wszystkie giełdy bardziej rozwinięte niż GPW
slayer74
Kapitan
Posty: 44305
Rejestracja: 19 lip 2005 13:21
Lokalizacja: West Poland- FZ 1974

Autodesk, Inc. NASDAQ: ADSK programy do projektowania CAD/CAM

Postautor: slayer74 » 29 lis 2017 16:08

Ostatnio zmieniony 26 sie 2020 12:25 przez slayer74, łącznie zmieniany 2 razy.
Pieniądz robi pieniądz a bieda robi jeszcze wiekszą biedę !!!

REKLAMA


slayer74
Kapitan
Posty: 44305
Rejestracja: 19 lip 2005 13:21
Lokalizacja: West Poland- FZ 1974

Re: Autodesk, Inc. NASDAQ: ADSK programy do projektowania CAD/CAM

Postautor: slayer74 » 29 lis 2017 16:10

Autodesk Q3 Results Not Enough, Despite Topping Estimates

http://247wallst.com/technology-3/2017/ ... estimates/
Pieniądz robi pieniądz a bieda robi jeszcze wiekszą biedę !!!

slayer74
Kapitan
Posty: 44305
Rejestracja: 19 lip 2005 13:21
Lokalizacja: West Poland- FZ 1974

Re: Autodesk, Inc. NASDAQ: ADSK programy do projektowania CAD/CAM

Postautor: slayer74 » 03 gru 2017 09:45

Is Autodesk’s Great Growth Story Over for Investors?
http://247wallst.com/technology-3/2017/ ... investors/
Pieniądz robi pieniądz a bieda robi jeszcze wiekszą biedę !!!

slayer74
Kapitan
Posty: 44305
Rejestracja: 19 lip 2005 13:21
Lokalizacja: West Poland- FZ 1974

Re: Autodesk, Inc. NASDAQ: ADSK programy do projektowania CAD/CAM

Postautor: slayer74 » 22 lis 2018 20:40

Autodesk, Inc. (NASDAQ: ADSK) released fiscal third quarter financial results after markets closed Tuesday. The firm said that it had $0.29 in earnings per share (EPS) and $660.9 million in revenue, which compares with consensus estimates that are calling for $0.26 in EPS and $642.3 million in revenue. The same period from last year had a net loss of $0.12 per share and $515.3 million in revenue.

During the quarter, total annual recurring revenue (ARR) was $2.53 billion, an increase of 33% compared to the third quarter last year as reported, and 31% on a constant currency basis. Under the prior revenue accounting standard, total ARR was $2.49 billion, an increase of 31%.

Subscription plan ARR was $1.93 billion, an increase of 108%. Also, total subscriptions increased 143,000 from the second quarter of fiscal 2019 to 4.08 million at the end of the third quarter.

Deferred revenue was $1.79 billion, an increase of 2% for the quarter. Separately, total deferred revenue (deferred revenue plus unbilled deferred revenue) was $2.24 billion, an increase of approximately 17%.

Looking ahead to the fourth quarter, the company expects to see EPS in the range of $0.40 to $0.44 and revenue in the range of $700 million to $710 million. Consensus estimates are calling for $688.87 million in revenue for the coming quarter.

https://247wallst.com/technology-3/2018 ... q3-report/
Pieniądz robi pieniądz a bieda robi jeszcze wiekszą biedę !!!

slayer74
Kapitan
Posty: 44305
Rejestracja: 19 lip 2005 13:21
Lokalizacja: West Poland- FZ 1974

Re: Autodesk, Inc. NASDAQ: ADSK programy do projektowania CAD/CAM

Postautor: slayer74 » 26 sie 2020 11:55

Autodesk Earnings
Autodesk earnings rose 51% to 98 cents a share. Revenue grew 15% to $913.1 million. Analysts expected Autodesk earnings of 90 cents and sales of $899.3 million.

The design software maker guided in line for the full year, but investors may have expected more after the Q2 beat.

Autodesk stock fell nearly 3% to 245.73 overnight. Shares edged up 0.2% to 252.24 on Tuesday. Autodesk cleared a 251.49 buy point, according to Marketsmith, after topping a 246.46 early entry.

https://research.investors.com/stock-qu ... c-adsk.htm
Pieniądz robi pieniądz a bieda robi jeszcze wiekszą biedę !!!

slayer74
Kapitan
Posty: 44305
Rejestracja: 19 lip 2005 13:21
Lokalizacja: West Poland- FZ 1974

Re: Autodesk, Inc. NASDAQ: ADSK programy do projektowania CAD/CAM

Postautor: slayer74 » 04 sie 2021 11:43

CZWARTEK, 29 LIPCA 2021
Autodesk (ADSK)


Autodesk to amerykańskie przedsiębiorstwo zajmujące się tworzeniem oraz serwisem oprogramowania komputerowego przeznaczonego dla przedsiębiorstw produkcyjnych. Programy firmy powszechnie wykorzystywane są w dziedzinach technicznych i inżynierskich m.in. przez konstruktorów, architektów, elektroników, mechaników i innych projektantów. Jest jedną z największych tego rodzaju spółek na świecie z kapitalizacją rynkową równą ok. 68 mld. $ i zatrudnia w sumie 11 500 pracowników.

Jako producent oprogramowania do druku 3D firma niezależnie od rozwoju konkurentów w sektorze drukarek 3D, zyskuje na coraz częściej wykorzystywanej technologii. Jest więc przysłowiowym sprzedawcą szpadli i sita firmom poszukującym złoto. Oprogramowanie firmy jest wykorzystywane m.in. w branży motoryzacyjnej, inżynierii mechanicznej i technologii budowlanej. Od 2015 roku klientami Autodesk są również firmy medyczne. Większość sprzedaży generowana jest w obszarach architektury, inżynierii mechanicznej i budownictwa. Firma ma klientów z różnych branż i dlatego nie jest uzależniona tylko od jednego sektora gospodarczego. Celem jest optymalizacja produktów w sposób cyfrowy, zanim zostaną one wdrożone w rzeczywistości. W przeszłości firma regularnie udowadniała, że ​​jest firmą wysoce innowacyjną, na bieżąco dostosowuje się do rynkowych trendów o czym świadczy chociażby przejęcie firmy Spacemaker za 240 milionów dolarów w listopadzie 2020 roku. Spacemaker pomaga architektom i urbanistom tworzyć projekty budynków w ciągu kilku minut.

Spółka w ostatnich 5 latach zdołała zwiększać przychody o średnio 8,7% rocznie, w 10 letnim ujęciu 6,9% rocznie, a to sugeruje, że należy do firm rozwiniętych. Mimo tego średnioroczny wzrost kursu akcji z minionej dekady przekraczał 24,7% (rocznie), czyli ponad 800% zysku. Według szacunków, trend do rosnących wyników finansowych ma się w kolejnych latach utrzymywać - przychody z 3790 mln. $ w 2020 roku, mają do 2024 roku wzrosnąć do 5944 mln. $.

Technicznie akcje są dosyć zmienne, tzn. że regularnie dochodzi do korekt kursu, które w głębokości spadków przekraczają 20%. Obecnie cena notuje przy okolicach historycznych szczytów, które są oporem, który po wybiciu ponad może dać sygnał zakupu - jako potwierdzenie kontynuacji trendu wzrostowego. Podsumowanie i więcej danych do firmy, tradycyjnie na końcu:
link na końcu

Podsumowując: Autodesk należy do liderów w swoim sektorze i jako spółka rozwinięta rośnie głównie poprzez kolejne przejęcie i wdrażanie w nowe segmenty gospodarcze. Fundamentalna wycena akcji wskazuje obecnie ponadprzeciętnie wysoką wycenę i przez średnią dynamikę wzrostową wyników finansowych, ta wysoka wycena niesie ze sobą ryzyko, że przyszła korekta będzie ponadprzeciętnie głęboka. Osobiście uważam, że lepszą w tej kategorii spółką jest Nemetschek (którą posiadam w portfelu tradingowym), jeśli jednak ktoś woli zainwestować w lidera, to może to właśnie zrobić poprzez inwestycję w Autodesk.

https://www.pamietnikgieldowy.pl/2021/0 ... -adsk.html
Pieniądz robi pieniądz a bieda robi jeszcze wiekszą biedę !!!

slayer74
Kapitan
Posty: 44305
Rejestracja: 19 lip 2005 13:21
Lokalizacja: West Poland- FZ 1974

Re: Autodesk, Inc. NASDAQ: ADSK programy do projektowania CAD/CAM

Postautor: slayer74 » 24 lis 2021 15:35

Autodesk (NASDAQ:ADSK) stock dropped 13% after the software company narrowed its profit and revenue guidance and lowered its billings forecast.
Pieniądz robi pieniądz a bieda robi jeszcze wiekszą biedę !!!

slayer74
Kapitan
Posty: 44305
Rejestracja: 19 lip 2005 13:21
Lokalizacja: West Poland- FZ 1974

Re: Autodesk, Inc. NASDAQ: ADSK programy do projektowania CAD/CAM

Postautor: slayer74 » 27 maja 2022 07:23

Autodesk Reports Q1 Beat, Provides Outlook

Autodesk (NASDAQ:ADSK) reported its Q1 results, with EPS of $1.43 coming in better than the Street estimate of $1.35. Revenue increased 18% year-over-year to $1.17 billion, compared to the Street estimate of $1.15 billion.

Total billings rose 16% year-over-year to $1.129 billion. Design revenue was up 16% to approximately $1 billion, and Make revenue was up 27% to $103 million. Subscription plan revenue increased 17% year-over-year to $1.089 billion.

The company expects Q2/23 revenue in the range of $1.220 - $1.235 billion and non-GAAP EPS in the range of $1.54 - $1.60.

For the full 2023-year, the company expects EPS in the range of $6.43-$6.66, compared to the consensus of $6.69, and revenue in the range of $4.96-5.06 billion, compared to the consensus of $5.04 billion.

Shares of Autodesk were down 32% year-to-date into the results.
Pieniądz robi pieniądz a bieda robi jeszcze wiekszą biedę !!!

slayer74
Kapitan
Posty: 44305
Rejestracja: 19 lip 2005 13:21
Lokalizacja: West Poland- FZ 1974

Re: Autodesk, Inc. NASDAQ: ADSK programy do projektowania CAD/CAM

Postautor: slayer74 » 25 sie 2022 12:54

Investing.com - Autodesk (NASDAQ:ADSK) reported on Wednesday second quarter earnings that beat analysts' forecasts and revenue that topped expectations.

Autodesk announced earnings per share of $1.65 on revenue of $1.24B. Analysts polled by Investing.com anticipated EPS of $1.57 on revenue of $1.22B.

Autodesk shares are down 23% from the beginning of the year, still down 37.74% from its 52 week high of $344.39 set on August 24, 2021. They are under-performing the Nasdaq 100 which is down 20.85% from the start of the year.

Autodesk follows other major Information Technology sector earnings this month
Autodesk's report follows an earnings beat by Apple on July 28, who reported EPS of $1.2 on revenue of $82.96B, compared to forecasts EPS of $1.16 on revenue of $82.79B.

Microsoft had missed expectations on July 26 with fourth quarter EPS of $2.23 on revenue of $51.87B, compared to forecast for EPS of $2.29 on revenue of $52.38B.
Pieniądz robi pieniądz a bieda robi jeszcze wiekszą biedę !!!

slayer74
Kapitan
Posty: 44305
Rejestracja: 19 lip 2005 13:21
Lokalizacja: West Poland- FZ 1974

Re: Autodesk, Inc. NASDAQ: ADSK programy do projektowania CAD/CAM

Postautor: slayer74 » 26 lut 2023 13:42

Autodesk (ADSK) reported a 24%
EPS gain with Q4 sales up 9%, but
the design software maker disappointed with its earnings outlook
for the current quarter and full
year ahead. Shares tumbled.
Pieniądz robi pieniądz a bieda robi jeszcze wiekszą biedę !!!


Wróć do „Zagranica”

REKLAMA

Kto jest online

Użytkownicy przeglądający to forum: Obecnie na forum nie ma żadnego zarejestrowanego użytkownika i 19 gości